Cutting fluid and cleaning agent Strength R & D manufacturers

Free samples, customized solutions for all walks of life for customers. Listed products have ROHS test report
tel
4dhcpmingchen
HF-MW-09
[Next] 
1. Main advantages1.1. Excellent lubrication and cooling performance and super load-bearing capacity;
1.2. Efficient and continuous anti-embroidery and anti-rancid ability;
1.3, pH neutral, no irritating odor, safe and environmentally friendly;
1.4. Very low foam, easy to clean, no asphalt slag formation;
1.5. No sulfur/phosphorus/halogen/phenol/nitrite/sulfate/nitrate/mineral oil/animal oil/vegetable oil, etc.;
1.6, does not contain anions and cations, and does not produce negative effects such as ion pollution;
Everyone knows that 45# steel is high carbon steel and is widely used in the field of auto parts, but its machined parts are very easy to rust, especially in high temperature and high humidity weather, because carbon steel is easy to form a primary battery (Fe is the anode and C is the cathode), so it is easily corroded.
Therefore, a water-soluble fully synthetic cutting fluid was specially developed for the parts used in the automotive industry (material 45# steel) and aluminum alloys that are prone to rust after machining. The integrated functions of cutting, cleaning, rust removal and rust prevention are All-in-one formula---(cutting + cleaning + rust removal + rust prevention) four in one.
HF-MW-09 cutting fluid has comprehensive features that are not available in the current market cutting fluid:
1. It has the characteristics that cutting fluid should have—excellent lubricity, wettability, cooling, dispersibility, extreme pressure bearing capacity.
2. Efficient cleaning ability----Excellent cleaning ability, the machined parts can be exempted from the requirements of subsequent cleaning.
3. Efficient continuous corrosion inhibition and strong rust removal. The rust removal principle is not the usual acid-base rust removal but the complexation principle, because the complex rust removal will not occur the usual rust rebound. Therefore, it can be used as both a rust remover and a rust inhibitor.
4. Reduce costs visibly to the naked eye --- In terms of materials, only one cutting fluid can effectively replace four materials (cutting fluid + cleaning agent + rust remover + rust inhibitor); in terms of working hours, it has more advantages The extremely high cost performance also greatly reduces the trouble and cost caused by rework. At the same time, production management has been fully optimized.
2. Main application 2.1. Suitable for machining of hard materials such as stainless steel, aviation aluminum, aluminum alloy, wafer, chip, semiconductor, copper, and other non-ferrous metals
2.2. The recommended concentration is 6%---10%; the comprehensive effect of cutting and other working fluid prepared with deionized water is better
2.3. Shelf life: 2 years (original packaging)
3. Main properties3.1. Appearance: homogeneous light yellow transparent liquid;
3.2. pH value: 8.5±0.5;
3.3. Coefficient of friction: 0.0631 (785N, 1200 rpm, 120 seconds);
3.4. Specific gravity (20℃, g/cm3): 1.03;
3.5. Viscosity (mm2/s, 40℃): 13.96;
3.6. Surface tension: 29.9mN/m;
3.7. Cloud point: 32℃;
3.8. Extreme pressure data:
3.9, Pb value: 1569N
3.10. Pd value: 1961N
3.11. Content of metals such as sodium, potassium, iron and copper: ≤10ppm
3.12. Non-metal content such as sulfur, phosphorus, halogen (in chlorine): ≤10ppm
3.13. Water solubility: completely miscible with water
4. Precautions4.1. Incompatible with strong oxidants and strong bases.
5. Storage conditions: 5.1. Store in a cool, dry and ventilated room, sealed and sealed after each opening; avoid strong oxidants, strong alkalis, high temperature environments, direct sunlight, and keep away from fire sources .
5.2. It is valid for two years in the original packaging condition.
6. ROHS report 7. Fully synthetic cutting fluid test report

About usContact us

Florin is mainly engaged in the production and technical development of environmentally-friendly water-soluble machining fluids, lubricating oils, environmentally friendly cleaning agents, glass mildew inhibitors, automotive frozen liquids, automotive ureas, etc. for metal/optical glass/LED materials cutting/grinding processes. , to provide professional services to customers
qq
qr
wechat
Nanchang Florin Technology Co., Ltd. Copyright © 2018 all rights reserved [BMAP] [GMAP] [Backstage management]